How To Reupholster A Gaming Chair?

How to reupholster a gaming chair? To reupholster a chair, you will first need to remove the seat, take the old fabric out, attach a new fabric, and again attach the seat. Sounds very simple.

But it is not simple unless you know the step-by-step guide. Because in the middle of reupholstering, make a center in the pattern, adjust the corners, and so on.

No doubt, all high-quality chairs require reupholstery to look elegant. And if we go through the proper steps, it will be easier for us to perform the task at ease.

In this article, we will discuss everything about reupholstering a gaming chair and how to do it. So let’s not make any further delay and jump to the concept straight.

Keep reading!

How To Reupholster A Gaming Chair? (Steps By Steps)

Before we go through the guide for reupholstering a chair, first we have to know what tools and materials are needed for it.

Well, you will need a sewing machine, a staple gun, a fabric pencil, a staple remover, a screwdriver, some straight pins, one or two scissors, an upholstery fabric, and a welt cord.

Here are some quick tips you can follow to reupholster your gaming chair. Let’s have a look below:

Choose The Right Fabric:

Here are some fabric options that you can use to reupholster a gaming chair:

Leather:

Leather is a superb option to use for gaming chairs. Its materials consist of synthetic fibers. It hardly absorbs water and will surely keep dust away from the seat. Since leather has a shiny and smooth surface, there won’t be any hassle meant to rub off the residues.

Chenille:

Most gamers prefer abrasive fabrics. In that case, Chenille would be a nice choice. Its texture is soft and fluffy which makes the sitting posture more comfortable. Besides, it is going to last for a long time.

Polyester:

Polyester is another robust fabric you can opt for. Since it is resistant to stain and abrasion, most gamers choose this fabric for their gaming chairs.

Woven And Non-Woven Fabrics:

You can go with any type of fabric. It is a mixture of cotton and polyester. On the other hand, the non-woven type of fabric is a mixture of polypropylene and polyester.

It is a cheaper option. But if you want to make a good investment seeking durability, then the woven type of fabric would be the best.

Disassemble The Chair:

First thing first, you have to disassemble your chair. The seat and backrest are going to remain cushioned.

So, you must take those cushions out. It’s easy to do, just remove some screws. you can use the screwdriver for it. Again, remove the fabric backing to get the staples out from the cushion with the staple remover.

Measure The Fabric:

Don’t forget to take the dimensions of your chair. Including the seat, back, and arms. You must ensure that the fabric fits the stitching.

Since the fabric needs to cover the entire chair, you have to measure the length, width, and height correctly.

Put The Cushion In Place:

After taking out the staples, take the materials of the chair, and let the cushion stay in place. Then put the cushion of your gaming chair on the fabric that you have chosen, and cut the fabric according to the size of the cushion.

A cutting mat or a rotary cutter can help you in this regard.

Prewash The Fabric:

Before you are going to use the fabric, prepare it first. Remove all the dirt and stains from the fabric with a gentle wash. After washing it, wipe out the fabric with a dry cloth again. Thus, your chair will look spotless.

Leave Enough Fabric on The Edge:

Make sure to leave enough fabric so that you can wrap it around the cushion and pin it around the back. There won’t be any problem if you edge too much fabric as you can cut the excess later.

Attach The Fabric:

It would be better if you put some glue on the back of the fabric and attach it to the foam. As a result, everything will remain in place when you staple it. Another best way would be to sew the fabric.

Make A Stitch:

For stitching the fabric, use a sewing machine. There are some reliable stitches you can choose from. Like- satin, zigzag, straight, etc. The more the thread is thick and durable, the more your stitch is going to be.

Draw The Fabric:

Next, draw the fabric at the back of the cushion and staple it to the base of the wood. Make sure not to pull it too hard since it can lead to creases in the cushion.

Pull The Cloth Evenly:

Try to pull the cloth tightly, fold it behind the cushion, and attach it across the cushion. It should be pulled firmly and gently. If you see any excess fabric at the bottom of the cushion, just cut them off.

Comfort The Fabric:

To comfort the fabric, you can use padding. Thick padding would be great as it gives better support. Some good paddings are- foam pads, foams, inflatable paddings, and so on.

Complete The Fabric:

Some coats of polyurethane are enough to give a finish to the fabric. Thus, your fabric will get a new look and get protective.

Frequently Asked Questions

Can You Reupholster A Computer Chair?

Reupholstering a computer chair is not a hard task. Whether the fabric of your chair is wearing down or you just want a change in the fabric, reupholstering a computer chair is simple.

How Much Will It Cost To Reupholster An Office Chair?

To reupholster an office chair you can expect to spend about $200 to $1000. However, only upholstery fabric can cost you $30 to $60. This is the amount for one year of the fabric. Other than that, the labor charges will cost you $50 to $100 if the service is just for an hour.

How Many Yards of Fabric Are Needed To Reupholster A Chair?

It depends on the type of your chair and how much cloth you may need for reupholstering it. On average, you may require 3 to 7 years of fabric.

If your chair does not have any armored back cushions, go with 3 yards of cloth. But if your chair has a high wing back with armrests, go with 7 yards of fabric.

Is Reupholstering A Chair Worth It?

A high-quality chair looks beautiful and requires upholstery often. Because upholstering an item of furniture increases its durability.

It’s only for high-quality chairs. If your chair is of low quality, it’s better to go with a new chair rather than upholstering it.

What Are The Tools Needed For Reupholstering A Chair?

Here are some tools below that you will need to reupholster your chair:

• Sewing scissors.
• Upholstery needle.
• Claw tool.
• Stapler.
• Rubber Mallet.
• Webbing Stretcher.

Final Thoughts

So this was all about reupholstering a gaming chair. As said before, the elegance of a high-quality chair increases when we reupholster it. So it would be a perfect decision if you acknowledge the step-by-step guide for it.

Just make sure you have all the tools in your hand. If possible, take someone’s help to execute the task. Since a gaming chair has arms, backs, and everything, you must go with 7 yards of cloth to reupholster it.

Last but not least, do your best to give a nice makeover to your chair, and let us know through the comment section below about your experience.

This is all. Thank you.